FAE Tools Tooth Type STC Two Bolts
FAE Tools Tooth Type STC 2005 Part number:112215000-K
STC and STC/R STCH and STCH/R STCH/SD and STCH/R/SD, 500RC
Standard rock tooth used on medium/high power stone-crushers
Forestry mulcher replacement teeth; fixed tooth mulcher; fae forestry mulcher
FAE Mulcher Tooth Type STCL
Tooth type STCL
Part number:112800009-K
STCL, STC/SSL With double carbide tip, it can be used on low power stone-crushers.
fae mulcher holders; fae mulcher machine parts; teeth for fae mulchers; replacement teeth for fae mulcher
Tooth Type D/HM for FAE Mulcher
Tooth type D/HM Part number: 112800038-k
Fitting FAE UML Low, UML/SS,UML/ST, UML/DT, UMM, UML/SSL, UML/HY, UML/EX, UMM/EX, UMM/S/EX, 140U, 200U.
It can replace teeth C and C/SD. Not suitable for rocky applications.
Higher rate of production than the C tooth
Replaceable blade that bolts from the front for faster and easier replacement
Sharp and precise cut with finer final product
Carbide tips allows for longer tooth life.
Tooth Type B/SR for FAE Mulcher
Tooth Type D Part Number: 112800 026-K
Fitting FAE UML LOW, UML/SS, UML/ST, UML/DT, UMM, UML/SSL, UML/HY, UML/EX, UMM/EX, UMM/S/EX, 140U, 200U.
Higher performance than tooth C; Replaceable blade that bolts from the front for faster and easier replacement; Sharp and precise cut with finer final product; the blade can be rotated 180 deg allowing both sides to be used doubling tooth life.
Mulcher Tooth Type C/SD (two bolts)
Tooth Type C/SD (two bolts) Part number:111530009-K UML LOW, UML/SS, UML/ST, UML/DT, UMM, UMM/S and UMM/S/HP, UMH and UMH/S, UML/SSL, UML/HY, UML/EX, UMM/EX, UMM/S/EX, 140U, 200U, 300U, 500U. Similar features as the C tooth with two additional pieces of carbide. Its carbide is extremely shock and wear resistant. Suitable for heavy applications and can be used as side-scraper tooth.
Tooth TYPE C/SD Fitting FAE Mulchers
UML LOW, UML/SS, UML/ST, UML/DT, UMM, UMM/S and UMM/S/HP, UMH and UMH/S, UML/SSL, UML/HY, UML/EX, UMM/EX, UMM/S/EX, 140U, 200u, 300u, 500H.
Similar features as the C tooth with two additional pieces of carbide. Its carbide is extremely shock and wear resistant. Suitable for heavy applications and can be used as side-scraper tooth.
replacement teeth for fae mulcher; fae forestry mulcher parts; fae mulcher head teeth
FAE Mulcher Tooth Type C 2006
Applications: wood cutting for FAE Mulchers Suitable for UML LOW,UML/SS, UML/ST, UML/DT, UMM, UMM/S and UMM/S/HP, UMH and UMH/S, UML/SSL, UML/HY, UML/EX, UMM/EX, UMM/S/EX, 140U, 200U, 300U,500U. Weight: 1.55KG/PC Hardness: HRC38~42 Body Material: Steel AISI4142 Tip Material: Tungsten Carbide No. Carbide: 2
forestry mulchers tooth; mulcher head teeth; fae teeth for sale
Tooth Type B/SR for FAE Mulcher
Same decription as the standard A/SR tooth with a single bolt mounting system. Also can be used in rocky applications. Not to be used as tone Crushing tool. UMM/S and UMM/S/HP, SSL and SSL speed, 300U, 200S. mulcher head teeth; forestry mulchers tooth; mulcher teeth carbide
FAE Mulcher Tooth Type B
FAE Mulcher Tooth Type B Part number:111708000-K UMM/S and UMM/S/HP, SSL and SSL speed, 300u, 200s.
Mulcher Teeth Type A/3
Applies to FAE machine model: UMH and UMH/S, SSM and SSM/HP, SSH,SCH and SCH/GT, 500U, 300S
Type A
Apply for FAE Machine models: UMH, UMH/S, SSM, SSM/HP and SSH.SCH and SCH/GT, 500U,300S
Cat Holder QC110HD
QC110HD ,QC110H
Quick-Change Block Systems
For .76″ (20 mm) Shank Tools
Trenching bits T11
Trencher
• tool/block combinations optimize your trenching chain, concrete saw, and force-feed grinder capabilities!
• Range of options available to suit a wide variety of cutting conditions!
• Backed by superior technical and customer support to help you get the results you need!
• Maximize your trenching and sawing productivity and profitability!
Cutting Tools and Blocks C87KCSBSR 1010937
Our cutting tools and blocks are proven in:
• dirt and gravel road maintenance
• hard-packed snow and ice removal
• chip and seal road reclamation
• tar sand road reclamation
• spot asphalt milling
• spreading loose material
• mixing calcium chloride, magnesium
chloride, or other dust suppressants
Grader Tools C858KCSB
Bausde scarifier blades:
• easily penetrate hard-packed gravel roads
• require less down pressure and horsepower than standard blades when penetrating hard surfaces
• far outlast all-steel blades because our blades feature carbide-tipped cutting tools made from
our exclusive grades of long-lasting tungsten carbide
• feature rotating, self-sharpening cutting tools for more uniform wear and longer tool life
• eliminate “washboard” and pot holes better than standard blades
• maintain an even cutting height by enabling cutting tools to be rotated from position to position
Our cutting tools and blocks are proven in:
• dirt and gravel road maintenance
• hard-packed snow and ice removal
• chip and seal road reclamation
• tar sand road reclamation
• spot asphalt milling
• spreading loose material
• mixing calcium chloride, magnesium
chloride, or other dust suppressants
Dragon Tooth BFR46-22
Dragon teeth are used as ripping teeth on augers, drilling buckets and coring barrels. The range comprises several types for different areas of application.
Main features
• high durability due to wear-resistant tempered steel
• high grade tungsten carbide tip
• excellent rotation (and thus uniform wear) and secure seating due to a clamping sleeve
• high degree of solder quality
• extraction groove for easy tooth replacement
Tooth holder
The tooth holders are optimally adapted to the different types of . Rear ejector port facilitates easy tooth
replacement. Its compact construction facilitates the execution of complicated cutting geometries and optimal adjustment of tooth position.
BFZ65 FZ64
• adjustable cutting angle by rotating tooth up to 180° in its holder
• easy tooth replacement with purpose-built extraction tool
• compact construction facilitating complicated cutting geometry
• high durability due to wear-resistant manganese steel
• tungsten carbide inserts on cutting edge and on both flanks
(optional)
• optimum transition from tooth to tooth holder to cutting blade
• every tooth is positioned in optimum cutting geometry
• high strength resulting from forging
• optimal protection of tooth holder
• patented
Proven tooth types FZ 64 and FZ 80 continue to be available for
use with older types of drilling tools.
